🏠 893 pilots online
GeoFS v3.9 Clone | Sattas Super Resolution | Sattas Attribution License

✈️ Welcome to GeoFS Flight Simulator

STEP 1 OF 3: FLIGHT CONTROLS

Keyboard Hotkeys & Controls

Fly using your keyboard arrow keys or W/S/Q/E inputs:

Arrow Down (↓): Pitch Nose Up (Takeoff)
Arrow Up (↑): Pitch Nose Down
Arrow Left/Right (←/→): Roll Left/Right
W / S: Increase / Decrease Throttle
Q / E: Rudder Yaw Left / Right
1 - 0 Keys: Set Throttle % (0 to 100%)
B: Apply Wheel Brakes
G: Landing Gear Toggle
STEP 2 OF 3: COCKPIT GAUGES

Authentic 5 Analog Gauges Cluster

Monitor your flight telemetry in real-time at the bottom of the screen:

  • Heading Indicator: Shows compass direction (0°..360°).
  • Airspeed Indicator: Displays current speed in Knots.
  • Attitude Indicator (Horizon): Displays pitch attitude and bank roll angle.
  • Altimeter: Shows altitude above sea level in Feet.
  • Vertical Speed (VSI): Shows climb or descent rate in 100 Feet/Min.
STEP 3 OF 3: NAVIGATION & MENU

Change Location & Aircraft

Use the bottom navigation bar to customize your flight session:

• Click AIRCRAFT ✈️ to switch between Piper Cub, Cessna 172, Airbus A320, and F-16 Fighter Jet.

• Click LOCATION 📍 to instantly teleport to San Francisco, New York, Tokyo, or Lukla Airport.

• Click AUTOPILOT at top right to enable automatic speed & altitude hold.

📘 GeoFS Flight Guidelines Manual

1. BASIC TAKEOFF PROCEDURES

1. Press W or press key 9 to increase engine throttle to 90% power.

2. Keep the aircraft straight on the runway using Q / E for rudder control.

3. Once speed reaches 60 Knots, pull back on the stick (Press Down Arrow ↓) to rotate the nose up and climb smoothly.

2. IN-FLIGHT MANEUVERS & LEVELING

• Use gentle taps on Left / Right Arrows to bank into turns.

• Level off pitch once reaching desired cruise altitude (e.g. 3,000 FT) using the Attitude Indicator horizon gauge.

3. APPROACH & LANDING

1. Reduce throttle to 30% by pressing 3.

2. Align heading with the runway centerline.

3. Descend at -500 FPM vertical speed. Touch down main wheels first, then press B to apply wheel brakes.